Audi Q5 / SQ5 FY Mileage Blocker

Overview

The Audi Q5 / SQ5 FY mileage blocker is a dedicated plug-in module that controls how much additional distance is recorded while the vehicle is moving.

Mode 1 records 25% of the distance travelled, while Mode 2 records 5%. Both settings retain a continuous display of actual speed. Mode 3 returns the vehicle to normal mileage recording.

The module connects behind the instrument cluster using OEM-style plugs, without cutting or soldering. When correctly installed, it operates without warning lights or fault codes, and driver assistance systems continue to function normally.

Check the fitted connector and instrument-cluster display before selecting your module, particularly for vehicles around the mid-2020 connector transition.

Compatibility

The Smelecom Audi Q5 / SQ5 FY mileage blocker is listed for:

• Audi Q5 FY
• Audi SQ5 FY
• Vehicles with the display shown in the product images

The supplied fitment information gives the following connector guidance:

• 2018–2020 vehicles: Listed as using the 32-pin version.
• Mid-2020 onwards: Listed as using the 18-pin version.

These date ranges overlap during 2020, so confirm the connector physically fitted to your vehicle before ordering. VAG-family connector types can vary by model, year and display or instrument-cluster configuration.

If you need help checking compatibility, contact Smelecom with your VIN and a clear photograph of your dashboard or instrument cluster.

Key Features

• Dedicated FY application: Designed for compatible Audi Q5 / SQ5 FY vehicles.
• Selectable recording levels: Mode 1 records 25% of distance, Mode 2 records 5%, and Mode 3 restores normal mileage counting.
• Actual speed displayed: The speedometer continuously shows actual speed in both reduced-recording modes.
• Plug-and-play fitting: Installs behind the instrument cluster without cutting or soldering the original wiring.
• OEM-style connectors: Original-type plug connections provide a secure, factory-style fit.
• Steering-wheel control: Hold the OK button for 10 seconds to change modes, including while the vehicle is moving.
• Activation confirmation: Turn-signal flashes in the speedometer confirm activation.
• No warning lights or fault codes: Correct installation allows the module to operate without triggering error messages.
• No mileage jump on removal: The odometer does not catch up or jump forward when the module is removed and the vehicle is returned to standard.
• Last-setting memory: Remembers whether the module was on or off when the vehicle was last used.
• Driver assistance retained: Driver assistance systems continue to operate normally.

How Does the Audi Q5 / SQ5 FY Mileage Blocker Work?

The module contains a small microcomputer that connects to the wiring behind the instrument cluster. It selectively blocks and filters the mileage signal to control the additional distance recorded by the odometer and related control units.

The recorded proportion depends on the selected mode. Actual speed remains continuously displayed in both reduced-recording settings, and the system stays stable without warning lights when correctly installed.

Hold the OK button on the steering wheel for 10 seconds to change modes. Repeat the action to cycle through Mode 1, Mode 2 and Mode 3:

• Mode 1: Actual speed is displayed continuously and 25% of the distance travelled is recorded.
• Mode 2: Actual speed is displayed continuously and 5% of the distance travelled is recorded.
• Mode 3: Normal operation and original mileage counting are restored.

Turn-signal flashes in the speedometer confirm activation. To return to normal mileage recording, repeat the 10-second OK-button hold as needed until Mode 3 is selected.

Quality and Installation

Each unit is programmed and checked in-house before dispatch to ensure correct operation on its specified vehicle type. High-quality components are used for long-term operation in the dashboard environment.

Every kit includes a clear, step-by-step instruction pack. Installation by a suitably experienced auto electrician or specialist is recommended.

Confirm the fitted connector before installation and follow the supplied vehicle-specific fitting guide:

1. Switch off the ignition and allow the vehicle’s electrical system to shut down.
2. Access and remove the instrument cluster or Virtual Cockpit using the correct vehicle-specific procedure.
3. Disconnect the original cluster connector.
4. Connect the module inline between the vehicle wiring loom and the instrument cluster.
5. Where a Pin 1 or alignment mark is provided, align it correctly without forcing the connector.
6. On later Audi / VAG harnesses, connect the cluster end first where specified by the supplied fitting guide.
7. Ensure all plugs are fully seated and correctly oriented.
8. Secure the module and wiring so they cannot be trapped, pinched or strained.
9. Refit the instrument cluster and trim.
10. Switch the vehicle back on and confirm normal instrument-cluster and assistance-system operation.

Shipping and Availability

• UK and worldwide shipping available.
• Most in-stock orders are dispatched the same day.
• Next-working-day UK delivery options are available at checkout for eligible in-stock orders.
• International delivery options are available depending on destination.

Important Information

This product is supplied strictly for off-road, motorsport and tuning purposes only.

Modes 1 and 2 reduce mileage recording rather than stopping it completely. They record 25% and 5% of distance respectively. Mode 3 restores normal mileage counting.

The customer is responsible for ensuring that use of the device complies with all applicable laws and regulations in their country or region.

For questions about Audi Q5 / SQ5 FY fitment, connector selection or installation, contact the Smelecom team before placing your order.