Audi A3/S3/RS3 8V with Virtual Cockpit odometer blocker/mileage filter

Mileage Stopper – Speedometer Stopper – Speed ​​Filter – Mileage Blocker – Mileage Stop – Can Emulator – Can Blocker

The right module for the Audi A3/S3/RS3 8V with Virtual Cockpit

 Type 1 (32-pin connector): A3/S3/RS3 8V with or without Virtual Cockpit from 2018 – 2020

 Type 2 (18-pin connector):A3/S3/RS3 8V with or without Virtual Cockpit from mid 2020 – UP

CHECK CONNECTOR!!

❎ Activation of the KM Freezer for the Audi A3/S3/RS3 8V from 2016 with a Virtual Cockpit with functioning speed display is done in this way:

The activation of the speedometer with a functioning speed display in the Audi A3/S3/RS3 8V with Virtual Cockpit/without Virtual Cockpit is done by pressing the OK button for 10 seconds, which is located on the steering wheel. Press the Ok button for 10 seconds → Mode 1. Press the Ok button for 10 seconds → Mode 2. Press the Ok button for 10 seconds → Mode 3

Functional sequence:

Mode 1: The actual speed is displayed permanently – only 25% of the actually driven distance is counted. From 100 Miles/Km, only 25 Miles/Km is counted.

Mode 2: The actual speed is displayed permanently – only 10% of the actually driven distance is counted. From 100 Miles/Km, only 5 Miles/Km is counted.

Mode 3: Everything back to the original mileage counting ✅

Please note percentages quoted above can differ, and relevant to the cars actual software.

❗️ In each mode, all assistance systems function properly ❗️

❎ Activation of the KM Freezer for the Audi A3/S3/RS3 8V from 2016 with a Virtual Cockpit non-functioning speed display is done in this way:

Mode 1

Simultaneously press the return button ↩️ on the steering wheel and the arrow key to the left ◀️
the kilometres/miles are not recorded.
The Km/h speedometer always works up to a speed of 20 km/h.
Above 20 km/h the speedometer works for 10 seconds. (Acceleration phase)
After 10 seconds, the Km/h speedometer stops and drops to zero.
If you come to a standstill or a speed below 20 km/h, the correct speed will be displayed again for 10 seconds.
✅ The head-up display always shows the actual speed ✅

Mode 2

If you simultaneously press the return button ↩️ on the steering wheel and the arrow key to the right,
Only half of the kilometres driven will be recorded. (50%)
The tachometer in this mode works continuously but displays half the actual speed.
✅ The head-up display always shows the actual speed ✅

Mode Normal

Simultaneously press the return button ↩️ on the steering wheel and the ok button
The kilometres are recorded completely and everything works as usual.

The right module for the Audi A3/S3/RS3 8V with Virtual Cockpit

Originals & High-quality processing of the plug-in system

All functions work with the speedometer module

Plug & Play plug-in system with connections.

No soldering or cutting of cables or electronic components required

The ultimate solution to block the mileage for all ECUs in the vehicle

1. Easy and fast installation. ✅
2. Disassemble the odometer and disconnect it. Then connect the kilometre filter with the plug connection. ✅
3. The installation does not require cutting or soldering of cables.
4. It is activated by pressing a button on the steering wheel. ✅
5. No error messages in the speedometer or navigation ✅
6. Cruise control continues to function without exception ✅
7. Other functions are fully usable ✅
8. No error messages in the dashboard ✅
9. The confirmation of the activation takes place in the speedometer by the turn signal flashes ✅

The KM Freezer always saves the last setting. Nothing has to be reset every time you start your journey. Activation and deactivation can take place at any time, both while driving and while stationary.