Mercedes GLE Class C292 odometer blocker/mileage filter

Mileage Stopper – Speedometer Stopper – Speed ​​Filter – Mileage Blocker – Mileage Stop – Can Emulator – Can Blocker

The right module for the Mercedes GLE Class C292

❎ Activation sequence for the KM/Mile Freezer with working speedo:

On the steering wheel press the return button  3 times quickly (1 beep) → Mode 1 (KM/MILES stops counting + Speedo stops counting)

On the steering wheel press the return button  3 times quickly (2 beeps) → Mode 2 (KM/MILES stops counting + Speedo works)

On the steering wheel press the return button  3 times quickly (3 beeps) → Mode 3 (KM/MILES back to normal)

SPEEDO ADJUSTMENT you have the option to adjust the speedometers needle indicator. If speedometer shows car’s speed is lower than the real car’s speed, in MODE 2 push “Arrow UP” button on left side of steering wheel whilst driving. After 3 seconds speedometer pointer will start slowly going UP. Release “Arrow UP” button when speedometer needle shows actual speed. The same is achieved with the “Arrow DOWN” button – you can adjust speedometer pointer to read lower value by pushing “Arrow DOWN” button for 3 seconds.

The right module for the Mercedes GLE Class C292

Originals & High-quality processing of the plug-in system

Plug & Play plug-in system with connections.

No soldering or cutting of cables or electronic components required

The ultimate solution to block the mileage for all ECUs in the vehicle

1. Easy and fast installation. ✅
2. Disassemble the odometer and disconnect it. Then connect the kilometre filter with the plug connection. ✅
3. The installation does not require cutting or soldering of cables.
4. It is activated by pressing a button on the centre console. ✅
5. No error messages in the speedometer or navigation ✅
6. Cruise control continues to function without exception ✅
7. No error messages in the dashboard