Mercedes S Class W222 C217 A217 odometer blocker/mileage filter

Mileage Stopper – Speedometer Stopper – Speed ​​Filter – Mileage Blocker – Mileage Stop – Can Emulator – Can Blocker

The right module for the Mercedes S Class W222 C217 A217

❎ Activation sequence for the KM Freezer with working speedo:

The activation on the Mercedes S Class W222 C217 A217 is achieved by pressing the return button  3 times quickly (within a 2-second window).

On the steering wheel press the return button  3 times quickly (1 flash of indicators) → Mode 1 (KM/MILES stops counting + Speedo stops)

On the steering wheel press the return button  3 times quickly (2 flashes of indicators) → Mode 2 (KM/MILES stops counting + Speedo works)

On the steering wheel press the return button  3 times quickly (3 flashes of indicators) → Mode 3 (KM/MILES back to normal)

SPEEDO ADJUSTMENT you have the option to adjust the speedometers needle indicator. If speedometer shows car’s speed is lower than the real car’s speed, in MODE 2 push “Arrow UP” button on left side of steering wheel whilst driving. After 3 seconds speedometer pointer will start slowly going UP. Release “Arrow UP” button when speedometer needle shows actual speed. The same is achieved with the “Arrow DOWN” button – you can adjust speedometer pointer to read lower value by pushing “Arrow DOWN” button for 3 seconds.

❎ Activation sequence for the KM Freezer with non-working speedo:

Mode 1

Press the  button for 3 seconds on the steering wheel, the speedo indicator shows half the speed and the kilometres/miles counting are half recorded. 

Mode 2

Press again the  button for 3 seconds on the steering wheel, the speedo indicator shows zero the speed and the kilometres/miles counting are not recorded. 

Mode 3

Press the return button  for 3 seconds on the steering wheel, the speedo indicator and kilometres/miles are recorded normally and everything works as usual.

The right module for the Mercedes S Class W222 C217 A217

Originals & High-quality processing of the plug-in system

Plug & Play plug-in system with connections

No soldering or cutting of cables or electronic components required

The ultimate solution to block the mileage for all ECUs in the vehicle

1. Easy and fast installation. ✅
2. Disassemble the odometer and disconnect it. Then connect the kilometre filter with the plug connection. ✅
3. The installation does not require cutting or soldering of cables.
4. It is activated by pressing a button on the steering wheel. ✅
5. No error messages in the speedometer or navigation ✅
6. Cruise control continues to function without exception ✅
7. Other functions are fully usable ✅
8. No error messages in the dashboard ✅

The KM Freezer always saves the last setting. Nothing has to be reset every time you start your journey. Activation and deactivation can take place at any time, both while driving and while stationary.